manualshive.com logo in svg

Grizzly G0772, Руководство пользователя, Страница: 11 / 124

Поделиться
Скачать
Grizzly G0772 Скачать руководство пользователя страница 11

Model G0772 (Mfd. Since 05/15)

-9-

The information contained herein is deemed accurate as of 12/3/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0772

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0772 14" SLIDING TABLE SAW

Product Dimensions:

Weight............................................................................................................................................................ 2486 lbs.

Width (side-to-side) x Depth (front-to-back) x Height....................................................................... 132 x 130 x 55 in.

Footprint (Length x Width)..................................................................................................................... 64-1/2 x 39 in.

Space Required for Full Range of Movement (Width x Depth)................................................................ 276 x 195 in.

Shipping Dimensions:

Carton #1

Type................................................................................................................................................ Wood Crate

Content................................................................................................................................................. Machine

Weight.................................................................................................................................................. 2389 lbs.

Length x Width x Height............................................................................................................. 90 x 52 x 44 in.

Must Ship Upright......................................................................................................................................... Yes

Carton #2

Type................................................................................................................................................ Wood Crate

Content.......................................................................................................................................... Sliding Table

Weight.................................................................................................................................................... 543 lbs.

Length x Width x Height........................................................................................................... 132 x 19 x 14 in.

Must Ship Upright......................................................................................................................................... Yes

Electrical:

Power Requirement..................................................................................................... 220V or 440V, 3-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating..................................................................................................... 28A at 220V, 14A at 440V

Minimum Circuit Size.......................................................................................................... 40A at 220V, 20A at 440V

Connection Type........................................................................................... Permanent (Hardwire to Shutoff Switch)

Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection

Motors:

Main

Horsepower.............................................................................................................................................. 10 HP

Phase.................................................................................................................................................... 3-Phase

Amps.................................................................................................................................................. 25A/12.5A

Speed................................................................................................................................................ 3450 RPM

Type........................................................................................................................................... TEFC Induction

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Scoring Blade

Horsepower................................................................................................................................................ 1 HP

Phase.................................................................................................................................................... 3-Phase

Amps...................................................................................................................................................... 3A/1.5A

Speed................................................................................................................................................ 3450 RPM

Type........................................................................................................................................... TEFC Induction

Power Transfer ........................................................................................................................... Flat-Belt Drive

Bearings........................................................................................................... Shielded & Permanently Sealed

Содержание G0772





























































































































Отзывы:

Нет отзывов