19
A
B
C
D
OPERATION
MANUAL DISCONNECT
Hold the J-bar with one arm and pull the release rope
with the other arm.
Lift the door up until fully open
STEP 1
STEP 2
To re-connect, re-attach the push arm by pulling the emergency release rope and connecting to the trolley pin.
Hold J-bar
with one arm
Pull cord in
direction shown
WARNING
Activation of manual release may cause uncontrolled movement of the door due to mechanical failure or out-of-balance conditions.
OPERATOR ALARM
The operator alarm will beep 3 times with a command if the battery
is low.
When the inherent force of the operator (RPM/current sensor)
detects the following (twice consecutively) the alarm will sound (up to
5 minutes) and the operator will need to be reset:
A. The door hits an obstruction
B. The door has a broken wheel(s) or damaged track
C. The door has broken springs or hardware
D. Trolley is hitting the chassis or an unwanted object
Remove any obstructions. Press the reset button to shut off the
alarm and reset the operator. After the operator is reset, normal
functions will resume.
