CIP 1300 – Use and Maintenance Manual
8
Chapter 2
INFORMATION
2.7 Information for the User
1 -
This manual reflects the current technical state of the machine and cannot be
considered inadequate simply because it is later updated on the basis of new
experience.
2 -
The Manufacturer reserves the right to update production and manuals, without
being obliged to update previous production and manuals.
3 -
The characteristics of materials can be changed at any moment, in accordance
with technical developments, without prior notice.
4 -
Where the machine is without an electric control and protection device (on board
electric panel) , the Manufacturer does not assume any responsibility concerning
safety problems deriving from electrical parts not conforming to what is advised
and/or laid down.
In any case compliance with all electricity related Laws and Regulations for
equipment the machine is fitted with shall be exclusively the responsibility of the
Customer, who shall install it to the required standard and fit for the purpose for
which it is to be used.
5 -
The Manufacturer considers itself relieved of any responsibility where the machine
has been put to:
Q
improper use;
Q
use by untrained staff;
Q
use contrary to what is set out in this Manual;
Q
use contrary to Regulations and Legislation currently in force;
Q
use with a mains power supply defect;
Q
use with serious lack of specified maintenance;
Q
use with modifications or work carried out not explicitly authorised by a written
note from the Manufacturer;
Q
use of non-original spare parts or spare parts not specifically defined for the
model;
Q
use with total or partial failure to observe the instructions contained in this
Manual.
6 -
The general sales warranty is void in case of:
Q
poor conservation;
Q
mishaps through incorrect use;
Q
use by inexperienced personnel;
Q
exceeding performance limits;
Q
excessive mechanical and/or electrical and hydraulic stress
Q
use under the non-optimal conditions described in point 5.
Any requests for further copies of this document must be formalised with a purchase
order forwarded to
Green Produzione.
