CIP 1300 – Use and Maintenance Manual
14
Chapter 7
TRASPORTATION
TRASPORTING THE MACHINE
WARNINGS :
Any persons not connected with operations must NOT pass through or
be in the machine’s area of movement, to avoid being struck by the
machine when it is suspended in the air.
Pay particular attention that the lifting speed is such as will avoid
dangerous swaying of the machine and the danger of the lifting cable
breaking.
Where the lifting or movement is carried out with a crane, the size of
lifting cable must be suitable for the weight of the machine, in order to
operate in conditions of complete safety.
When the machine has to be placed onto
a means of transport, it is possible to lift it
by means of a crane.
To carry out the crane manoeuvre in
safety the following procedures must be
followed.
•
check the overall weight of the
machine (
consult chapter 3:
“Technical Features”)
and verify the
lifting capacity of the hooks (equipped
with safety devices) and the lifting
ropes
(G)
•
Attach the hooks of the ropes to the
plates welded to the structure of the
machine
(P)
•
Lift the machine from the ground and
position it on the means of transport.
G
P
