CIP1300 – Use and Maintenance Manual
11
Chapter
5
SAFETY PROTECTION DEVICES
PROTECTION GUARDS AND DEVICES ADOPTED FOR REASONS
OF SAFETY
CAUTION:
The guards have been put in place by the manufacturer to
protect the safety of the operator.
During operation the guards must not be removed for any
reason.
A)
Fixed guards to close off the flywheel
rotation area.
B)
Hydraulic motor side protection case.
C)
Hydraulic pump rear protection case.
D)
Transmission belt fixed guard (PTO version
– CIP 1300PTO).
E)
Transmission belt fixed guard (Motorised
version – CIP 1300Y18 - 1300H24)
N.B.: the guards must in no way be
removed: when carrying out
maintenance switch off the engine
and remove the key from the control
panel or, for the P.T.O. version,
disconnect the cardan shaft
A
E
D
C
B
