CIP 1300 – Use and Maintenance Manual
16
YANMAR
ENGINE
Chapter
9
STARTING
STARTING THE MACHINE (version with independent motor)
CAUTION:
The starting key of the machine must be kept by the operator
whenever the machine is stopped. Leaving the key inserted in the
starting panel involves the risk of the machine being started by
third parties.
Start the machine following the procedure shown in the specific handbook of the
engine that is fitted.
INSTALLATION (version with three point attachment)
WARNING:
Check that the inclination of the cardan shaft when working at PTO
540 rpm does not exceed 16° and at PTO 1000 rpm does not exceed
9°.
Connect the machine to the three
attachment points of the tractor. Insert the
security pins
(B,C,D).
Connect the cardan shaft to the power take-
off of the tractor and to the entry shaft of the
machine
(A).
Check that the locking pins have engaged.
N.B.: Check that the cardan shaft has a
minimum axial play of 10 cm (G).
Check the rotation direction
(R).
Immobilise the tractor with the parking
brake. If the machine is provided with a
“No-Stress” device, connect the cable of the
instrument to the 12V battery.
Slowly start up the tractor and bring it up to
the necessary revs ((max 540 revs/min.).
HONDA
ENGINE
G
A
S E N S O R O T A ZI O N E
ALBERO ENTRATA
GRUPPO D’ANGOLO
PTO TRATTORE
R
B
A
C
D
ROTATION DIRECTION
TRACTOR PTO
ANGLE UNIT
ENTRY SHAFT
