CIP 1300 – Use and Maintenance Manual
28
Chapter
11
ORDINARY MAINTENANCE
CAUTION:
Danger of injury
To carry out the operations described above it is obligatory to
wear protective gloves, glasses or a protective visor, and safety
shoes.
ATTENZIONE:
Before any maintenance or adjustment operation, switch off the
engine and remove the key from the control panel.
11.10 Lubricating the flywheel
supports
With a manual grease pump, put some
lithium-based grease onto the flywheel
supports
(V)
.
11.11 Lubricating the mobile
roller running guides
With a brush, apply an abundant layer of
lithium-based grease to the running
guides of the mobile roller support
(G)
.
11.12 Lubricating the coupling
collar of the discharge
conveyor
Periodically spread lithium-based grease
onto the coupling collar
(C)
of the
conveyor, to make it easier to position.
11.13 Checking and replacing the
multiplier oil (PTO version)
Check the quantity of lubricant in the
multiplier by removing the filler
(L)
, and if
necessary top up with
ROOL-OIL EP 460
oil or its equivalent.
N.B.: The oil must be replaced every
1000 hours of operation.
C
V
G
L
