Gree Ultra Heat GMV-VQ72W/A-F, Руководство по обслуживанию

Страница: 157 / 207

Ultra Heat GMV VRF Technical Service Manual_Heat Recovery Serial MAINTENANCE
153
Remove the oil separator. For the removal procedure, refer to step 4. Tilt the separator to draw oil
out into a container. Block the container for further factory inspection.
(2) Check gas/liquid separator.
After the gas/liquid separator is taken out, check whether it contains impurities. The check
procedure is as follows:
Use a glass container to hold the liquid. Check liquid impurities and colors and block the container
for further factory inspection.
Note: If the compressor needs replacement, the gas/liquid separator needs replacement as well,
regardless whether the separator contains impurities or has faults or not.
(3) Check oil return pipe and oil balance pipe.
Remove oil return pipe and oil balance pipe, and check oil volume and impurity.
Note: Before replacing the faulty parts, make sure to block their openings with tapes. They should
be kept intact for further analysis. Volumes of oils drawn out from the oil separator, and gas/liquid
separator should be recorded. After faulty compressors and parts are replaced, you should fill new oils of
equivalent amount into the compressors and parts.