Gree CM100N1480, Руководство по обслуживанию

Страница: 61 / 266

GREE Multi Variable Air Conditioners Indoor Unit
55
(2) Wired Controller XK79 Installation Method:
1 2 3
4
6
9
5
7 8
Fig. 2.2.4 Installation diagram for wired controller XK79
Fig.2.2.4 is the simple installation process of wired controller XK79; please pay attention to the
following items:
1) Before installation, please cut off the power for indoor unit.
2) Pull out the 2-core twisted pair line connected with the indoor unit from the mounting hole
and through the outer shell.
3) Set the wired controller soleplate on the wall and use the M4X25 screws to fix it with the
mounting hole.
4) Separately fix the twisted pair on the H1 and H2 terminal by screws.
5) Gate-control wiring notice:
A. Factory default provided with Gate-control function (factory default the DIP switch S1
to “ON” side).
B. If the gate-control system is not involved, open the inner shell and turn the No.1 switch
of the DIP switch S1 to the number side which is located at the PCB of the inner shell
(please power up after finished switch the DIP).
C. If the gate-control system is connected, make sure the No.1 switch of the DIP switch
S1 is turned to the “ON” side. Connect the gate-control terminal to the N and L port or
the VCC and GND port. Attention to the following items:
a) The N and L port is the power supply interface of the 100-240V~50/60Hz gate
control.
b) The VCC and GND port is the power supply interface of the DC 5-24V gate
control.
c) Only one power input can be chosen between the 100-240V~50/60Hz and the DC
5-24V.