18
2.4 Connecting the AC Adapter/Power Cord
DO NOT plug the AC Adapter/Power Cord into an outlet which is
controlled by a switch. The switch could accidently be turned off,
causing the Base Unit to not work.
1. Connect the AC Adapter/Power Cord into the power jack on the back of
the Base Unit (See Figure 4, pg. 19).
2. Connect the AC Adapter/Power Cord into a standard 120V AC electrical
wall outlet.
3. When you have successfully connected your Base Unit to a power source,
the green POWER LED light on the Base Unit will illuminate. (See Figure
5, pg. 19)
WARNING
Electrical shock can cause SERIOUS INJURY or
DEATH. To prevent electrical shock, ALWAYS take the
following safety precautions:
• ALWAYS plug the AC Adapter/Power Cord into a
properly grounded 120V AC outlet.
• ALWAYS use ONLY the provided AC Adapter/Power
Cord.
• NEVER use the Base Unit or the AC Adapter/Power
Cord if they are damaged.
• NEVER use the Base Unit or the AC Adapter/Power
Cord if they are wet.
ELECTRICAL SHOCK HAZARD
