36
FREQUENTLY ASKED QUESTIONS
1. How do I place an emergency call on my
JUST IN CASE
TM
911 Emergency
Phone?
1. Press and hold the 911 Activation Button until you feel and hear it “click.”
2. Continue to press the 911 Activation Button for two seconds to place
the phone call to the 911 emergency operator.
3. After you hear a dial tone indicating the call is in progress, release the
911 Activation Button.
4. When the phone call to 911 has been activated and you hear a dial tone
followed by the three digits (9-1-1) being dialed, the Signal Test LED
Light will be
SOLID GREEN
.
5. BUSY SIGNAL: If you hear a busy signal, release the 911 button and
repress it. This will hang up the call. Try to place another emergency
call by repeating steps 1-4.
See page 24 for additional information.
2. Do I need 911 emergency service in my community for the
JUST IN
CASE
TM
911 Emergency Phone to work?
Yes, the ability of the
JUST IN CASE
TM
911 Emergency Phone to work is
dependent on the availability of 911 emergency service. It will NOT work if
you do not have 911 emergency service available in your community.
3. Can I have multiple
JUST IN CASE
TM
911 Emergency Phone Handsets
installed throughout my home?
Yes, you may install up to five Handsets for every one Base Unit in your
home.
