38
FREQUENTLY ASKED QUESTIONS
7. How do I test the battery and signal strength in the Handset?
Initiating the Battery and Signal Tests:
1. Press the TEST Button on the top of the Handset until you feel and
hear a “click.” (See Figure 8, pg. 30).
2. Hold the Test Button down for two seconds to initiate the battery and
signal test sequence.
3. After you release the TEST Button, the Handset will initiate the battery
and signal tests.
NOTE: It will take approximately 2 seconds for the tests to begin. DO
NOT press the TEST Button again during the test sequence.
See pages 27-30 for additional information.
8. Can I use the
JUST IN CASE
TM
911 Emergency Phone outside of the
United States?
No, your
JUST IN CASE
TM
911 Emergency Phone is only intended for use in
the United States.
9. Is there a Troubleshooting Guide in this Owner’s Guide?
Yes, the Troubleshooting Guide is located on page 34.
10.
Can I use my regular telephone after the
JUST IN CASE
TM
911
Emergency Phone is connected to my phone line?
Yes, you can use your regular phone as usual, however, your
JUST IN
CASE
TM
911 Emergency Phone will NOT work if the telephone line is not
available because your regular phone is in use, off the hook, or not working
properly.
