800.716.1433
www.lifewatch-usa.com
Key controls and indicators are identified here.
Your console and transmitter are already programmed and ready to use.
A battery inside the console provides up to five days of back-up power.
Speaker:
Transmits two-way voice connection with
certified EMT’s at the Lifewatch Center.
HELP button:
For triggering an emergency
call to the LIFE
Watch
Response Center.
QUICK SET-UP GUIDE
STEP 2
Plug the loose end of the gray
phone cord coming from the
back of the unit into wall jack.
(If your telephone cord is already
plugged into the wall jack,
remove it first.)
STEP 1
Plug the AC power adapter
into an electrical outlet that
is not controlled by a light
switch.
STEP 3
(Optional)
Plug phone cord that was
removed from wall jack
(Step 2) into bottom of the
unit marked “PHONE”.
STEP 5
Complete the forms
included and mail back to:
266 Merrick Road
Lynbrook NY, 11563
We need these forms in order to properly
respond in the case of an emergency.
STEP 6
Test the system by pressing
the gray button on the
transmitter.
(Please refer to our
“How to test and use your Lifewatch
system” on other side of this page.)
LED indicator:
Lights green when
alarm is successfully
transmitted to
PERS console.
ALARM button:
For triggering an emergency call
to the LIFE
Watch
Response Center.
LIFE
Watch
, Inc. • 266 Merrick Road, Suite 104, Lynbrook, NY 11563 • 800.716.1433
STEP 4
Turn your unit on by switching
the ON/OFF switch (located on
the back of the unit) to the ON
position.
LED Indicator:
Lights GREEN when power is on.
Clear/Reset Button:
Push to cancel a false alarm.
