57
M_LS1000 XP_EN_C
N.
Preventive maintenance
1. General maintenance
Unplug the power supply plug before beginning any cleaning or maintenance operation.
The mains power cable must be replaced immediately if it is cut or crushed, cracked or
a conductor is stripped bare.
The machine's maintenance needs depend on the type of material used, the quantity of material removed,
frequency of operation, environment and the effectiveness of the air extraction system. It is the user's
responsibility to define them.
Dust and debris that accumulate on the machine's components can cause irregular or imprecise engraving, or
the loss of the engraving position and the premature failure of components.
The accumulation of fumes or dust on the optical parts can damage them, reduce the power of the laser or
cause the premature failure of components.
Regularly cleaning the machine improves its operation, extends the life of parts and reduces the risk of failure.
Recommendations: Check and, if necessary, clean the machine every 8 hours of engraving/marking or cutting.
If debris has accumulated on the optics and the movement system, clean the machine more frequently. If the
system is relatively clean, you could extend the intervals between cleaning.
For help, contact Gravotech.
No internal parts of the machine require user intervention. Regular maintenance is limited to external cleaning
of the engraving area and the optics.
To clean other parts of the machine, call a Gravotech technician.
2.
Accessories provided
• 1 bottle(s) of cleaning solution
•
1 packet(s) of cotton buds for mirrors
•
1 packet(s) of lens cleaning wipes
Follow the handling instructions indicated on the product labels.
