45
M_LS1000 XP_EN_C
Operating instructions for the machine
This key is used to adjust the height of the engraving table.
The operator can adjust the vertical position anywhere within the area.
1. To switch to vertical movement: Press the key:
.
2. Press and hold the key(s).
/
.
The table moves vertically to the desired position.
3. Release the key(s).
4.
To confirm, press the key:
.
The vertical position is saved.
Access to the different menus
To access the machine menu(s):
1. Switch on the machine.
Wait until the following message appears on the screen:
<READY TO RECEIVE >
2. Press the key:
.
PARAMETERS
FILE
INFO
CONFIGURATION
To select a menu, press the key(s) as many times as necessary:
/
To confirm, press the key:
To cancel/exit, press the key:
