33
M_LS1000 XP_EN_C
J. Connections - Installation
1.
Power supply connection - Water chiller
1.
Power inlet / outlet (with fuse) - Dangerous voltage
2.
Power cable
3.
General stop button (Power switch)
1. Connect the power cord to the chiller socket and then plug into the mains socket.
To cut the power supply to the chiller in the event of a major problem, unplug the power cord or actuate the
general stop button on the chiller.
Switching on the chiller
1. Set the general stop button to the "I"(On) position.
•
The pump starts up immediately. The green indicator light illuminates and no alert is sounded.
•
The screen displays the current water temperature.
Always switch on the chiller before the machine.
Check that the water cooling circuit is operating properly. Check that water cannot leak
onto the electronic components of the machine.
1
2
3
