40
M_LS1000 XP_EN_C
Connections - Installation
Power down: Machine - Water chiller
1.
Machine: Put the On/Off switch in the "O" (Off) position.
2. Water chiller: Set the general stop button to the "O"(Stop) position.
Switch off the machine in the following situations:
•
when the operator is permanently leaving the machine
•
in the event of physical damage (something is dropped on the machine, fire, a liquid is spilled on the
machine, etc.)
•
mechanical/electrical/electronic faults suggesting a breakdown
•
if there is a major problem or the machine is jammed mechanically
•
the machine is jammed on the part to be engraved/marked
•
the machine is jammed on an object in the work area
• forced restart
• external/internal cleaning
•
filling the tank (Water chiller)
Restarting
If the machine or the operating program locks, the machine may need to be restarted.
1.
Switch off the machine.
2. Wait approximately 30 s.
This waiting time must be respected. It prevents an electric surge likely to damage the machine's power supply.
3. Switch on the machine.
