GRAUPNER mx-20 Hott, Руководство по программированию

Страница: 74 / 296

74 Detail program description - Base setup model | Helicopter
Before programming specifi c parameters, there are
some basic settings to be made which effect the
currently active model memory. Select the "Base setup
model
" menu with the arrow keys of the left or right
touch pad then press the center SET button in the right
touch pad.
Helicopter type
Suppress models
Base setup model
Ser vo adjustment
Control adjust
Stick mode.
Model name
Mod.name
Stick mode
RF BIND
1
n/a
BASIC SETTINGS, MODEL
n/a
BD2 BD1
RF transmit OFF
Change to the next screen page by briefl y pressing
the
SET button in the right touch pad. This will open
a screen of characters for entry of the model's name.
A maximum of 9 characters can be used to specify a
model name.
! " # $ % & ’ ( ) + , – . / 0 1 2
3 4 5 6 7 8 9 : ;
Mod Name STAR L
F G H I J K L M N O P Q R S T U V W X
Y Z [ ¥ ] ^ _ ` a b c d e f g h i j k
? @ A B C D E
Select the desired characters with the arrow keys of the
left touch pad. Move to select the next character position
by pressing the

arrow key of the right touch pad or its
center SET button Simultaneously pressing on the

or

keys of the right touch pad ( CLEAR) will place a
space character at the position.
Positioning to any character position within the entry fi eld
can be done with the

keys of the right touch pad.
A return to the previous menu screen is accomplished
by pressing the center
ESC button in the left touch pad.
A model name entered in this manner will appear in the
base screen of the "
Model select " menu and in the sub-
menus of the " Copy / Erase " menu item.
Stick mode
"MODE 2" (throttle left)
"MODE 3" (throttle right) "MODE 4" (throttle left)
"MODE 1" (throttle left)
TS-Nick
Tail
Nick
Tail
Motor/Pitch
Roll
Roll
Motor/Pitch
Tail
Tail
Motor/Pitch Motor/Pitch
Nick
Nick
Roll
Roll
Nick
Nick
Roll
Roll
Motor/Pitch
Motor/Pitch
Tail
Tail
Motor/Pitch
Motor/Pitch
Roll
Roll
Nick
Nick
Tail
Tail
Basically there are four different ways to assign the
four helicopter control functions, roll, nick, tail rotor and
throttle/pitch to the two joysticks. Just which of these
is used depends on the preferences of the individual
model pilot.
Use the

arrow keys of the left or right touch pad
to select the "Stick mode" line. The option fi eld will be
framed.
1
SEL
STARLET Mod.name
Stick mode
RF BIND
n/a
BASIC SETTINGS, MODEL
n/a
RF transmit OFF
Press the SET button. The currently displayed stick
mode will be displayed in inverse video. Now use the
arrow keys of the right touch pad to select from among
options 1 through 4.
Pressing simultaneously on the

or

keys of the
right touch pad ( CLEAR ) will return the option selection
back to stick mode "1".
Pressing the
SET button again will deactivate option
selection so that you can change to another line.
Bound receiver
Graupner -HoTT receivers must be "instructed " to
communicate exclusively with one particular model
(memory) in a
Graupner -HoTT transmitter. This
procedure is known as "binding" and must only be done
once for every new receiver/model memory location
combination (and can be repeated anytime).
Important notice:
During the binding procedure be sure the
transmitter's antenna is always far enough away
from the receiver's antenna. To be on the safe side,
keep them at least one meter apart. Otherwise you
run the risk of a faulty connection to the return
channel and malfunctions will result.
"Binding" multiple receivers per model
Multiple receivers per model can be bound if desired,
Base setup model
Model-specifi c base settings for helicopter models