GRAUPNER Micro Star 1000, Руководство пользователя

Страница: 10 / 36

Micro Star 1000
10
Screw the two Hiller paddles onto the ends of the flybar as far as they will go. Check that both
paddles are exactly the same distance from the centre of the rotor head.
Fig. 3 Securing the flybar paddles
Align the flybar paddles parallel with each other and with the control bridge, as shown in the
drawing (right-hand main rotor rotation, i.e. clockwise), then tighten the two M3 x 3 grubscrews
to prevent the paddles rotating on the flybar.
Fig. 4 Centring the auxiliary rotor
Temporarily attach the factory-assembled swashplate driver to the main rotor head using an M3
x 15 socket-head cap screw and self-locking nut, as shown in Fig. 5.
Fig. 5 Attaching the main rotor head and swashplate driver