GRAUPNER Micro Star 1000, Руководство пользователя

Страница: 17 / 36

Micro Star 1000
17
The swashplate and tail rotor servos are installed using the fittings supplied in bag “D”, as shown
in drawings 17 and 18. Please note that the two pushrods for each push-pull linkage must be
exactly the same length. The lever length of the servo output arms must also be 12 mm, so that
the hole spacing is exactly the same as that of the bellcranks.
Figs. 17, 18: Installing the swashplate servos
The stated pushrod lengths are only a starting point, and you may need to adjust them slightly to
suit the servos you have installed. The absolute length is not very important; the crucial point is
that both pushrods must be exactly the same length.