GRAUPNER Micro Star 1000, Руководство пользователя

Страница: 12 / 36

Micro Star 1000
12
As shown in Fig. 10, the sub-assemblies prepared thus far can now be fitted on the main rotor
shaft, which is found in bag “A”:
Fig. 10: Main rotor and shaft (excl. rotor blades)
The lower collet with the two M3 x 4 grubscrews is supplied in bag “C”.
Please ensure that the main rotor shaft is fitted the right way round: the end with one transverse
hole is the top end, that with two transverse holes the bottom end. Check also that the rotor
head retaining screw actually passes through the upper transverse hole, and not above it.
The main rotor assembly, prepared to this stage, can now be placed to one side temporarily, as
can the main gear and the toothed belt pulley.