GRAUPNER Micro Star 1000, Руководство пользователя

Страница: 18 / 36

Micro Star 1000
18
Fig. 19: Installing the tail rotor servo
The drive motor is attached to the motor mount as shown in Fig. 20, which must first be re-
moved from the chassis for this purpose. The moulding features slots for mounting the motor,
designed to enable the builder to set the requisite very slight meshing clearance between the
motor pinion and the main gear. Fix the pinion on the motor shaft with its top edge flush with the
top edge of the main gear; the grubscrew must engage squarely on the ground flat in the shaft.
When you are satisfied that all is well, tighten the motor retaining screws firmly.
Fig. 20: Installing the motor