GRAUPNER Micro Star 1000, Руководство пользователя

Страница: 9 / 36

Micro Star 1000
9
1. Assembling the model
Remove the factory-assembled rotor head from bag “A”, together with the control bridge, which
consists of two halves; open the bag of screws at the same time.
Remove the flybar from bag “G”; it is 2 mm in diameter and around 29 cm long.
Insert the flybar through the halves of the control bridge and the rotor head rocker, as shown in
Fig. 1.
Connect the halves of the control bridge to each other using the two 2.5 x 8 mm self-tapping
screws, then position the flybar so that the two machined flats coincide with the threaded holes
in the annular clamps of the control bridge; tighten the two M3 x 4 grubscrews in this position,
checking that the grubscrews engage squarely on the flats.
Fig. 1 Installing the control bridge and flybar
Fix the rotor brake dish to the rotor head hub using the M3 x 12 round-head allen-head screw.
Fig. 2 shows how the blade holders are fitted, in case a repair ever becomes necessary; when
initially building the model you will find that these parts are factory-assembled:
Fig. 2 Main rotor blade holder and bearing assembly