GRASS VALLEY KALEIDO-MX 3RU Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 49

background image

5

Kaleido-MX (3RU)

Quick Start Guide

• DVD including the Release Notes for the current version of the Kaleido-X software, the

Kaleido-X User’s Manual, database samples, Quick Start guides and hardware reference
manuals for all multiviewer models

In addition to the above, you might need the following (not supplied):

• Up to 4 displays

• A dedicated 100Base-T Ethernet switch with enough ports for the Kaleido-MX, client

PCs, Kaleido-RCP2, and Audio Bridge Terminals

• Client PC (see below for system requirements)

• Cables (to connect your multiviewer to video sources, to displays, and to the network):

System Requirements for a Client PC

A client PC or laptop meeting the following requirements is required to access the XAdmin
Web client, and the other Kaleido-X client applications.

Note:

In line with our commitment to environmental preservation, only the

Quick Start Guide for your multiviewer model, and some ancillary
documents (e.g. welcome letters, warranty cards) are distributed in printed
form. All manuals and the Release Notes are available on the DVD that
shipped with your multiviewer. See the

Documentation

section of the

Release Notes for a complete list. You can obtain the latest version of the
manuals, the Release Notes, as well as software and useful data, from the

Software and documentation

section of Grass Valley’s support portal.

Cable type

Purpose

CAT-5

For Ethernet connectivity

Display cables

To connect the multiviewer’s HDMI outputs to displays:
• Standard HDMI cables
• Extension modules—for example, Grass Valley’s DXF-200

DVI/HDMI Optical Extension System (part number DXF-
200-B)

To connect the multiviewer’s SDI outputs to displays:
• Standard coaxial cables with DIN 1.0/2.3 connectors
• SDI to HDMI 2.0 (or SDI to DisplayPort) converter—for

example, AJA’s Hi5-4K Mini-Converter (firmware version
2.2 or later)

Video cables

Standard coaxial cables with DIN 1.0/2.3 connectors

Note:

On all Kaleido multiviewers, the network adapters are set to auto-

negotiate. By default, the connection speed and duplex mode will be set
automatically based on the corresponding port settings on the switch.

Operating system

Windows XP Professional, Windows 7, Windows 8, or Windows 8.1

Processor

Core 2 Duo at 2 GHz, or better

USO

RESTRITO

«
...
13
14
15
16
17
...
»

Содержание KALEIDO-MX 3RU


















































Отзывы:

Нет отзывов

Похожие инструкции для KALEIDO-MX 3RU

Бренд: Olympus Страницы: 2

Бренд: NEO Smartpen Страницы: 6

Бренд: ZIGBEE Страницы: 5

Бренд: Concord Camera Страницы: 57

Бренд: Samcon Страницы: 28

Бренд: GPX Страницы: 2

Бренд: NED Страницы: 82

Hello Kitty KT7004

Бренд: Spectra Страницы: 11

Бренд: StarLogic Страницы: 21

Бренд: T'nB Страницы: 26

Бренд: Idis Страницы: 18

Бренд: Basler Страницы: 3

Бренд: VistaQuest Страницы: 1

Бренд: Sharp Страницы: 67

Бренд: Sharp Страницы: 84

Бренд: Teletechno Страницы: 17

Бренд: LEEDS WORLD Страницы: 2

EDGDM-219581-PE

Бренд: Edge Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды