GRASS VALLEY KALEIDO-MX 3RU Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 49

background image

36

Setting Up Your Kaleido-MX Multiviewer

System Verification

The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité frame’s local control panel.

2 On the local control panel, press the [–] button repeatedly until NETWORK SETTINGS

appears on the display, and then press the SEL button.

FRAME IP ADDRESS EDIT appears on the control panel’s display.

3 Press the SEL button again.

The current system IP address appears on the display. This is your system’s virtual
IP address (i.e., the address you will use to access your system from XEdit and XAdmin).

4 Press the Select button

on the front edge of the output card

to exit the control menu.

Verifying an Output Card’s IP Address and Application Version

To verify the IP address and application version on an output card

1 Press the Select button on the front edge of the Kaleido-MX

output

card.

The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité frame’s local control panel.

2 Note the position indication

A

or

B

in the card information shown on the first line of the

LCD display: either KMX-OUTA, or KMX-OUTB, followed with the slot number (e.g., KMX-
OUTA Slot 4).

3 On the local control panel, press the [–] button.

The version of the Kaleido-X Software that is running on the card (e.g. “7.33-
build.5516”) appears on the display.

4 On the local control panel, press the [–] button repeatedly until NETWORK SETTINGS

appears on the display, and then press the SEL button.

FRAME IP ADDRESS EDIT appears on the control panel’s display.

5 If the card is identified as KMX-OUTA on the display, then press the [–] button

repeatedly until OUTPUT A IP EDIT appears. If the card is identified as KMX-OUTB, then
press the [–] button until OUTPUT B IP EDIT appears.

6 Press the SEL button.

The current IP address for this card appears on the display.

7 Press the Select button

on the front edge of the output card

to exit the control menu.

Note:

If you have a single- or dual-head Kaleido-MX multiviewer, then this

IP address doubles as the system IP address.

USO

RESTRITO

«
...
44
45
46
47
48
...
»

Содержание KALEIDO-MX 3RU


















































Отзывы:

Нет отзывов

Похожие инструкции для KALEIDO-MX 3RU

Бренд: Olympus Страницы: 43

Бренд: distianert Страницы: 126

Бренд: Tactic Страницы: 20

FASTCAM Mini AX Series

Бренд: Photron Страницы: 74

Бренд: Ken A Vision Страницы: 10

Бренд: Ability Страницы: 44

Бренд: Sinar Страницы: 20

Бренд: Basler Страницы: 170

Бренд: Mamiya Страницы: 48

Бренд: Smartparts Страницы: 15

NI Vision NI 17 Series

Бренд: National Instruments Страницы: 90

Бренд: Leica Страницы: 2

Бренд: Polaroid Страницы: 2

PhotoMAX PDC 1050

Бренд: Polaroid Страницы: 20

Бренд: Polaroid Страницы: 37

Бренд: Polaroid Страницы: 53

Бренд: Polaroid Страницы: 67

Бренд: Camstick Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды