GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 56 / 227

2-27
2
When selectng [1] or [2] key, the followng screen s
dsplayed.
Please confirm that the stock shaft lock has been released,
then press the [ENTER] key.
When [3] key s selected to set-up meda more than 5 meters
long, the followng screen s dsplayed.
Please confirm, then press the [ENTER] key. To cancel,
please lower the set level and change the meda.
Supplement
The screen below shows a machne currently
detectng meda.
3
After the meda s detected, the plotter s ready to receve
data for cuttng or plottng. Ths status s called "READY
status" of the default screen.
When setting is finished, the tool carriage's location will
become the ntal pont.
If the nterface or command settngs have not been made,
make these settngs before sendng the data.
If the settngs have been made, tool adjustment s performed.
When the pen adjustments have been made, the plotter s
ready to start cuttng.
Send the cuttng or plottng data from the applcaton
software.
Dfault screen s dsplayed.