GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 133 / 227

6-14
Slght cut operaton s performed before the actual cut operaton to algn the blade toward the cuttng drecton.
Lower FORCE s necessary compared wth the normal cuttng, so t s possble to set lower FORCE as an
OFFSET FORCE.
OFFSET FORCE s used to control the rotaton of the blade wth the tangental mode n addton to control the
blade drecton at the begnnng of the cut.
Operation
Supplement
Perform the settngs n Normal menu.
1
Press the [PAUSE/MENU] key.
TOOL settng screen (1/3) s dsplayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/3) s dsplayed.
3
Press the [4] key (OFFSET FORCE).
OFFSET FORCE settng screen s dsplayed.
Supplement
Can be set from 1 to 38.
4
Press the POSITION ( ) key and ncrease or decrease the
settng value.
Supplement
It wll return to TOOLS SETTING screen (1/3)
wthout changng the settngs when you press
the POSITION ( ) key (CANCEL).
5
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to TOOLS SETTING screen (1/3).
6
Press the [PAUSE/MENU] key.
It wll return to default screen.
6.6
Settings for OFFSET FORCE