GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 125 / 227

6-6
Setting of the Initial Down Force
The ntal down-force settng s effectve when tangental mode s selected.
tangential mode is generally used for the cutting of thick media. With thick film, additional time is required for the
cutter blade to penetrate the meda fully, even when the necessary cuttng force s appled.
The cuttng operaton starts before the cutter blade has fully penetrated the meda, causng uncut sectons to be left.
When the initial down force is specified, this force is used as the cutting force immediately after the lowering of the
tool when tangental mode s selected, enablng the cutter blade to penetrate the meda rapdly. (As an example,
f the cuttng force s 25 and the ntal down force s 4, for example, the cuttng force appled mmedately after the
pen s lowered wll be 29)
The upper lmt for added value s 39.
Operation
Supplement
Condition No.1 is pen specific. When setting
up tool condtons for the cutter plunger, please
choose from Condton No.2 to Condton
No.8 under "Selectng the Tool Condton". For
more nformaton, see "2.10 Selectng Tool
Condton"
P.2-29
.
1
Press the [COND/TEST] key.
CONDITION settng screen (1/3) s dsplayed.
2
Press the POSITION ( ) key.
CONDITION settng screen (3/3) s dsplayed.
3
Press the [2] key (INITIAL DOWN FORCE).
INITIAL DOWN FORCE settng screen s dsplayed.
4
Press the POSITION ( ) key and select the CONDITION
No.
Supplement
Settng range s from 0 to 20.
5
Press the POSITION ( ) key and ncrease or decrease the
settng value.
Supplement
It wll return to CONDITION screen (3/3)
wthout changng the settngs when you press
the POSITION ( ) key (CANCEL).
6
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION settng screen (3/3).
7
Press the [COND/TEST] key.
It wll return to default screen.