Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.22 Air hose set – removal and installation
Page 13 of 15
REMOVAL / INSTALLATION
TABLE OF CONTENTS
18
For seat model Actros:
18.1 Remove the air hoses at the pin
contact strip (see Chapter 3.39).
18.2 Mark the points where the air
hoses (2, 3, 4) are fastened to the
air spring support (16) by means of
four cable ties (13) and remove the
cable ties (13).
Note:
If an EPS cable is fitted, take into
consideration the fastening of the
EPS cable at the air hoses (2, 3, 4)
by means of additional cable ties
(see Chapter 3.21).
Installation note:
The air hose (3) must run over the
connection piece (14).
18.3 Mark the point where the air hoses
(2, 3) are fastened to the lower
suspension part (15) by means of
cable ties (11) and remove the
cable ties (11).
R
7
6
1
3
2
5
14
4
Z
8
4
P R
10
12
12
19
4
8
9
P
9
1
8
3
2
13
4
3 2
13
4
4
3
15
2
15
16
16
1 12
13
13
11
13
14
13
A
Z
2213
