Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.37 Fore/aft isolator – removal and installation (delivery option)
Page 4 of 5
REMOVAL / INSTALLATION
TABLE OF CONTENTS
7 Release the clamp (4) and the stop
lever (10) and push the upper
suspension part (3) backwards
against the pivot point (arrow) of the
stop lever (10).
8
ATTENTION
Deformation!
The clamp (4) is mounted between the
swinging structure (6) and the upper
suspension part (3).
To remove the clamp (4), push a
screwdriver from the front horizontally
between the upper suspension part
(3) and the right side of the clamp (4)
and carefully lift the upper suspension
part (3) by means of the screwdriver
at the pivot point (arrow) of the stop
lever (10).
9 Push the clamp (4) forwards under the
stop lever (10) until it can be pressed
off at the swinging structure (6).
9
11
11
5
7
7
4
8
8
6
9
3
1
2
2
4
13
5
3
6
F
F
F
F
F
2253
10
4
14
6
13
5
3
10
