Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
Preliminary remarks
Page 3 of 4
TABLE OF CONTENTS
Basic information about the seat
The seat is provided with a long-lasting lubrication (approx. 10 years). The lubricating points must be re-greased only after
repair work, using an acid-free multi-purpose lubricant.
In the description of the present repair manual, not all fastening parts might be mentioned. After repair, it might be necessary
to check fastening parts regarding their factory-made laying, support and securing and to correct them respectively, if required.
Bowden pull wires, cables and air hoses may only be fastened with cable ties at the defined spots by hand (loose). Make sure
that in the case of a vertical seat adjustment, they are not squeezed or distorted when the seat is moved.
Replace all removed old parts with enclosed new ones. If there is no new part included, the old one is to be cleaned and
checked for its suitability for re-use. Defective parts and worn parts must be replaced by new ones.
GRAMMER
AG rejects any warranty claims if damaged or worn parts and assemblies are not replaced by spare parts
released by
GRAMMER
AG.
Qualified personnel
These instructions offer basic information on proper technical seat repair. The contents of the work procedures described are
intended for professionally educated technicians with profound product knowledge. This level of knowledge is an imperative
requirement when performing the work and procedures described in this document.
