Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.14 Bowden pull wire for locking mechanism of the fore/aft isolator –
inspection and adjustment (delivery option)
Page 4 of 5
INSPECTION ADJUSTMENT
TABLE OF CONTENTS
4.2 The Bowden pull wire (4) must
unlock the stop lever (7) from the
clamp (10) against the retracting
spring (8) and pull it back until the
stop lever forms a line (d) with the
cutout in the upper suspension
part (9).
4.3 The retracting spring (8) must hold
the eccentric (3) down in the locked
position via the Bowden pull wire (4).
Adjustment
1 Loosen the counternut (13) and use
the regulating screw (14) to bring the
stop lever (7) to an overlapping
position with the cutout in the upper
suspension part (9) – line (d) – (basic
setting).
2202
c
2
1
3
5
4
B
13
12
11
9
10
1
14
4
B
9
7
d
8
15
e
