Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.7
Bowden pull wire and button for quick lowering of the seat –
removal and installation
Page 5 of 6
REMOVAL / INSTALLATION
TABLE OF CONTENTS
14 Loosen the lock washer (13) at the
Bowden pull wire (1).
15 Remove the Bowden pull wire (1)
from the holder (5).
16 Detach the Bowden pull wire (1) at
the lever (4) and remove it.
Installation note:
Hand the Bowden pull wire (1) into
the front drill hole of the lever (4).
17
If the button for quick lowering
of the seat (6) is defective:
17.1 Pull out the grooved pin (12) at of
the lever (4) and at the holder (5) in
forward direction and remove the
lever (4).
Installation note:
Apply acid-free multi-purpose
lubricant to the entire external
surface (F) of the grooved pin (12).
11
9
8
10
1
13
14
1
12
5
F F
15
1
15
6
4
16
2
4
2
5
6
1
1
7
3
2176
