Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.14 Bowden pull wire for locking mechanism of the fore/aft isolator –
inspection and adjustment (delivery option)
Page 5 of 5
INSPECTION ADJUSTMENT
TABLE OF CONTENTS
2 Turn the regulating screw (14) away
from the nut (12) in order to shorten
the excess length of the hauling rope
(15) or turn the regulating screw (14)
towards the nut (12) in order to extend
the excess length of the hauling
rope (15).
Note:
Make sure not to distort the Bowden
pull wire (4).
3 Hold the nut (12) in position and
secure the adjustment with the
counternut (13).
4 Check the lever for the fore/aft isolator
(1) for proper functioning by operating
it several times in both directions and
readjust it, if necessary.
5 Install the seat cushion (Chapter 3.1).
2202
c
2
1
3
5
4
B
13
12
11
9
10
1
14
4
B
9
7
d
8
15
e
