Graco SaniForce SDU A01AAA1AA0C21, Руководство пользователя

Страница: 52 / 76

Electro-pneumatic Control Panel Display Screens
Network Network Network
To reduce the risk of injury due to electric
shock, remove power to the control panel before
entering the control panel to make connections for
measurement devices.
The Network page is used to configure the SDU for
network communication.
Currently, the system is only configured to
communicate through Ethernet/IP (EIP) protocol to a
remote programmable logic controller (PLC). Contact
Graco Customer Support for information regarding
network communication protocols.
Icon/Field Icon/Field Icon/Field Description Description Description
DHCP DHCP DHCP Check to enable Dynamic Host Configuration Protocol for the network connection.
IP IP
IP Address
Address
Address
The current IP Address of the system is displayed here. If DHCP is disabled, these fields
become editable to enter a static IP address.
Subnet Subnet Subnet Mask Mask Mask The current Subnet Mask utilized by the system is displayed here. If DHCP is disabled,
these fields become editable to enter a Subnet Mask.
Enable Enable
Enable
Ethernet/IP
Ethernet/IP
Ethernet/IP
Check to enable EIP network communication.
Remote Remote Remote IP IP IP
Address Address Address
Enter the IP Address of the remote PLC for the system to talk to.
Save Save
Save
The Save button will be active if the IP Address, Subnet Mask, or the Remote IP Address
have been edited. Press the Save button to save the edited value before leaving the Network
screen. Changes may be lost if the Save button is not pressed. If network communication
is enabled, restart the system to resume network communication after saving a value
in the Network settings.
Override Override Override
Remote
Remote
Remote
Check to stop reading values driven by the remote PLC into the system. If a sequence is
running, select the Override Remote box to stop the sequence and put the system in standby.
Ethernet/IP Ethernet/IP
Ethernet/IP
Status
Status Status
Shows if the active communication is connected or disconnected from the remote PLC.
52 3A5402J