Gossen MetraWatt 62 N Series Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 92

Gossen MetraWatt 62 N Series Скачать руководство пользователя страница 38

38

GMC-I Gossen-Metrawatt GmbH

(status: HOLD

→

HOLD)

Functions

!

The next memory location can be selected at any time from a
suspended

SEQUENCE

. The setpoints saved to the next

memory location are executed. Selected dwell times of the
exited and the new memory address are not taken into
consideration.

!

The device is switched from automatic sequence to step-by-
step control the first time this step is executed (see page 36).

•

The output retains its switching status (output On or Off).

•

When jumping from the stop address to the start address, the
remaining repetitions counter (rrep) remains unchanged.

Procedure:

☞

With

suspended

SEQUENCE,

– press the <FUNCTION> key and then browse with the
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq

step

appears

and execute the command with the

<ENTER>

key.

!

The

SEQUENCE

executes the next address.

!

Selected dwell times of the new and the exited memory
address are not taken into consideration.

!

The READY LED blinks slowly in the HOLD status.

Executing the Start Address and Beginning Step-by-Step Control
(status: HOLD

→

HOLD or RUN

→

HOLD)

Functions

!

The start address can be selected at any time from an
interrupted or a running

SEQUENCE

. The setpoints saved to the

start address are executed. Selected dwell times of the exited
and the new memory address are not taken into
consideration.

!

The device is switched from automatic sequence to step-by-
step control the first time this step is executed (see page 36).

•

The output is switched to the output On status.

•

The remaining repetitions counter is reset to the initial value
(rrep = rep).

Procedure:

☞

With

interrupted

or

running

SEQUENCE,

– press the <FUNCTION> key and then browse with the
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq

start

appears,

and execute the command with the

<ENTER>

key.

!

The

SEQUENCE

executes the start address.

!

Selected dwell times of the new and the exited memory
address are not taken into consideration.

!

The READY LED blinks slowly in the HOLD status.

4.7.4

buS – The “Interface” Function Group

The KONSTANTER can be set up for data transmission to a
computer in the interface configuration function group. In this
case, all of the settings previously selected with DIP switches are
entered via menu functions.
The serial port (RS 232) or the parallel port (IEEE 488) is used for
communication.

Addr – Selecting the Device Address (IEEE 488)

•

An address must be assigned to the SSP KONSTANTER in
order to assure that it functions correctly together with other
devices on the IEC bus.

•

If the KONSTANTER receives its own address from the computer, it
interprets subsequent data and executes the respective commands.

•

If it receives the address of another device, all subsequent
data are ignored until it receives its own address.

Settings

☞

Procedure

for selecting

Addr:

see also chapter 4.7 -

Settings.

☞

Press the <

FUNCTION

> key in order to access the

FUNCTION

menu.

!

The last edited function or function group is accessed
automatically.

☞

Select

bUS

configuration if necessary by pressing the

<

FUNCTION

> key, or the <

FUNCTION

> key and the <

↓

> key or

the <

↑

> key simultaneously.

!

bUS

appears at the left-hand display.

☞

Acknowledge by pressing the <ENTER> key.

!

The

bUS

function menu appears.

☞

Select the

Addr

function by pressing the <

FUNCTION

> key, or

the <

FUNCTION

> and the <

↓

> key or the <

↑

> key

simultaneously.

!

Addr

appears at the left-hand display, and the last selected

parameter appears at the right-hand display.

☞

Select an address for the SSP KONSTANTER with the <

↓

>

key or the <

↑

> key.

!

Any address within a range of 0 to 31 may be selected.

!

The selected address must be the same as the address
selected for the SSP KONSTANTER at the computer.

!

Address 0 is usually assigned to the controller.

!

Address 31 means unL (unlist).

☞

Acknowledge your selection with the <

ENTER

> key.

Figure 4.7.4 a

Path to Device Address Selection

From the bUS function group

Select the

device address

FUNCTION

Press repeatedly if necessary

ENTER

CE/LOCAL

FUNCTION

SAVE

RCL

Uset/Iset

FUNCTION

MENU

SAVE

MENU

RCL

MENU

FUNCTION

MENU

Activate

the setting

Abort

without change

«
...
36
37
38
39
40
...
»

Содержание 62 N Series





























































































Отзывы:

Нет отзывов