manualshive.com logo in svg

Gossen MetraWatt 62 N Series, Руководство по эксплуатации, Страница: 37 / 92

Поделиться
Скачать
Gossen MetraWatt 62 N Series Скачать руководство пользователя страница 37

GMC-I Gossen-Metrawatt GmbH

37

•

The output retains its switching status (output On or Off).

•

The 

SEQUENCE

 can be 

resumed

 (cont) at the next memory 

location, 

or ended at the current address 

<

CE/LOCAL

> or 

the stop 

address

 (stop) or 

restarted

 (go).

In addition, 

step-by-step control

 can be started at the 

next 

address

 (Step) or at the 

start address

 (Start) as well.

Procedure:

☞

With 

running

 

SEQUENCE,

– press the <

ENTER

> key or

– press the <FUNCTION> key and then browse with the   
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq 

hold

 appears 

and execute the command with the 

<ENTER> 

key.

!

The 

SEQUENCE

 stops

 

at the current address.

!

The READY LED blinks slowly in the HOLD status

.

Resuming the Sequence from the HOLD Status
(status: HOLD 

→ 

RUN)

Functions

!

A suspended 

SEQUENCE

 can be resumed at any time.

•

The output retains its switching status (output On or Off). 
The selected dwell time of the exited memory location is not 
taken into consideration.

!

The sequence is now resumed starting with the next address, 
and the values stored to the respective memory location (

Uset

, 

Iset

 and

 tdef/tset

) are read out to the power output.

!

In the case of very long dwell times, you can advance 
prematurely to the next memory location by 

pressing the 

<ENTER> key twice

 

(status: RUN 

→ 

HOLD 

→ 

RUN)

.

Procedure:

☞

With 

suspended

 

SEQUENCE, 

– press the <

ENTER

> key or

– press the <FUNCTION> key and then browse with the   
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq 

cont

 appears 

and execute the command with the 

<ENTER> 

key.

!

The 

SEQUENCE

 is resumed starting with the next memory 

location.

!

The READY LED blinks rapidly in the Run status

.

Ending the Sequence at the Stop Address (status: HOLD 

→ 

RDY)

Functions

!

A suspended 

SEQUENCE

 can be ended at any time by 

executing the stop address.

•

If the memory location assigned to the stop address is empty, 
the Uset and Iset values from the hold address are retained. If 
the memory location assigned to the stop address is not 
empty, Uset and Iset are changed to the corresponding 
values. Selected dwell time Tset of the current memory 
location is not taken into consideration.

•

The output status is determined by the contents of the stop 
address. The output retains its switching status (output On or 
Off) if the memory location assigned to the stop address is not 
empty. The output is switched to the off status if the memory 
location assigned to the stop address is empty.

Procedure:

☞

With 

suspended

 

SEQUENCE, 

– press the <FUNCTION> key and then browse with the   
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq 

stop

 appears 

and execute the command with the 

<ENTER> 

key.

!

The 

SEQUENCE

 is ended and the output status is determined 

by the contents of the stop address.

!

The READY LED does not blink in the RDY status

.

Ending the Sequence at the Current Address (status: HOLD 

→ 

RDY)

Functions

!

A suspended 

SEQUENCE

 can be ended at the current address 

at any time.

•

Uset and Iset retain the values specified in the current memory 
location. Selected dwell time Tset of the current memory 
location is not taken into consideration.

•

The output retains its switching status (output On or Off).

Procedure:

☞

With 

suspended

 

SEQUENCE, 

– press the <CE/LOCAL> key.

!

The 

SEQUENCE

 is ended and the output status is determined 

by the content of the current address.

!

The READY LED does not blink in the RDY status

.

Restarting the SEQUENCE 
(status: HOLD 

→ 

RUN or RUN 

→ 

RUN)

Functions

!

A suspended or running 

SEQUENCE

 can be restarted at any 

time.

•

The output is switched to the output On status.

!

In this case, all memory locations are executed, one after the 
other, from the start address to the stop address, and the 
respective values saved to each location (

Uset

, 

Iset

 and

 tdef/

tset

) are read out to the power output and the signal output.

Procedure:

☞

With 

interrupted

 or 

running

 

SEQUENCE,

– press the <FUNCTION> key and then browse with the   
<

↑

> key, the <

↓

> key or the <FUNCTION> key

until SEq 

go

 appears 

and execute the command with the 

<ENTER> 

key.

!

The 

SEQUENCE

 is restarted.

Figure 4.7.3 j

Suspending and Resuming a Sequence

Executing the Next Address and Beginning Step-by-Step Control 

ENTER

ENTER

ENTER

SEQUENCE

SEQUENCE

Sequence is resumed

Resume sequence

Restart sequence

End sequence

Select:

The setting
is executed

in hold status

READY

READY

in run status

READY

Step-by-step, start address

Step-by-step, next address

FUNCTION

FUNCTION

CE/LOCAL

End at

current address

Содержание 62 N Series





























































































Отзывы:

Нет отзывов