GMC 1989 Light Duty Truck, Руководство по ремонту, Страница: 302 / 998

4C4-14 K TRUCK FRONT AXLE
Figure 28— Turning the Adjuster Sleeve
F ig u re 2 9 — T u rn in g th e A d ju s te r Plug (K 35 M odels)
F-5873
Figure 30— Installing the Side Bearing Cups
2. New O-ring (62) to the adjuster plug (61) (K35
models).
3. Sleeves (32) and/or adjuster plug (61) to the carrier
case (29).
• K15-25 models: Use J 36599 (figure 28).
• K35 models: Use J 36599 for the right sleeve
(figure 28). Use J 36615 for the adjuster plug
(figure 29).
4. Side bearing cups (33). Use J 36603 with J 8092
(figure 30).
5. Differential assembly to the carrier case half.
• Place the differential assem bly into the carrier
case half which contains the pinion gear.
• Turn the left sleeve (32) (K15-25 models) or
a d ju s te r p lug (61) (K35 m od els) in u ntil
backlash is felt between the ring and pinion.
• K15-25 models: Use J 36599 (figure 28).
• K35 models: Use J 36615 (figure 29).
• Remove the carrier case from J 36598.
6
. Carrier case halves. Do not use sealer at this time.
• If the carrier halves do not make complete
contact, back out the right sleeve (32). Use
J 36599 (figure 28).
7. Bolts (28). Tighten to 47 N m (35 ft. lbs.).
ADJUSTING BACKLASH
Tools Required:
J 34047 Dial Indicator Set
J 8001 Dial Indicator Set
J 34047-3 Dial Indicator Adapter
J 3 6 5 9 9
F-5857
61. Adjuster Plug
63. Bolt
64. Lock
F-5858