Global411 MSW300Np4, Руководство пользователя

Страница: 42 / 52

41
RIP
Click RIP in the left pane, the page shown in the following figure appears. If you are using this device as a RIP-enabled router
to communicate with others using Routing Information Protocol (RIP), enable RIP. This page is used to select the interfaces on
your devices that use RIP, and the version of the protocol used.
The following table describes the parameters and buttons of this page:
Field Description
RIP Select Enable , the router communicates with other
RIP-enabled devices.
Apply Changes Click it to save the settings of this page.
Interface Choose the router interface that uses RIP.
Receive Version Choose the interface version that receives RIP
messages. You can choose RIP1 , RIP2 , or Both .

Choose RIP1 indicates the router receives RIP
v1 messages.

Choose RIP2 indicates the router receives RIP
v2 messages.

Choose Both indicates the router receives RIP
v1 and RIP v2 messages.
Send Version The working mode for sending RIP messages. You
can choose RIP1 or RIP2 .

Choose RIP1 indicates the router broadcasts
RIP1 messages only.

Choose RIP2 indicates the router multicasts
RIP2 messages only.
Add Click it to add the RIP interface to the Rip
Configration List .
Delete Select a row in the Rip Configration List and click
it to delete the row.