Global411 MSW300Np4, Руководство пользователя

Страница: 28 / 52

27
Field Description
have the same SSID. Enter a descriptive name
that is used when the wireless client connecting to
the modem.
Channel Number
A channel is the radio frequency used by
802.11b/g/n wireless devices. There are 13
channels (from 1 to 13) available depending on
the geographical area. You may have a choice of
channels (for your region) and you should use a
different channel from an adjacent AP to reduce
the interference. Interference and degrading
performance occurs when radio signal from
different APs overlap.
Choose a channel from the drop-down list box.
Radio Power
You can choose the transmission power of the
radio signal. The default one is 100% . It is
recommended to choose the default value 100% .
Show Active Clients
Click it to view the information of the wireless
clients that are connected to the modem.
Apply Changes
Click it to apply the settings temporarily. If you
want to save the settings of this page
permanently, click Save in the lower left corner.
Security
Choose WLAN > Security and the following page appears.
The following table describes the parameters of this page:
Field Description
Encryption
Configure the wireless encryption mode. You can
choose None , WEP , WPA (TKIP) , WPA (AES) ,
WPA2 (AES) , WPA2 (TKIP) , or WPA2 Mixed .

Wired equivalent privacy (WEP) encrypts
data frames before transmitting over the wireless
network.

Wi-Fi protected access (WPA) is a subset of
the IEEE802.11i security specification draft.

WPA2 Mixed is the collection of WPA and
WPA2 encryption modes. The wireless client
establishes the connection between the modem
through WPA or WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
Set WEP Key
It is available when you set the encryption mode
to WEP . Click it, the Wireless WEP Key Setup
page appears.
WPA Authentication
Mode

Select Personal (Pre-Shared Key) , enter the
pre-shared key in the Pre-Shared Key field.