Global411 MSW300Np4, Руководство пользователя

Страница: 31 / 52

30
The following table describes the parameters of this page:
Field Description
Authentication
Select the modem operating in the open system or
encryption authentication. You can choose Open
System, Shared Key , or Auto .

In the open system, the wireless client can
directly connect to the device

In the encryption authentication, the wireless
client connects to the modem through the shared
key.
Data Rate
Choose the transmission rate of the wireless data.
You can choose Auto , 1 M , 2 M , 5.5 M , 11 M , 6 M ,
9 M , 12 M , 18 M , 24 M , 36 M , 48 M , 54M,
MSC0-MSC15.
PreambleType

Long Preamble : It means this card always
use long preamble.

Short Preamble : It means this card can
support short preamble capability.
Broadcast SSID
Select whether the modem broadcasts SSID or not.
You can select Enable or Disable .

Select Enable , the wireless client searches the
modem through broadcasting SSID.

Select Disable to hide SSID, the wireless
clients can not find the SSID.
Relay Blocking
Wireless isolation. Select Enable , the wireless
clients that are connected to the modem can not
intercommunication.
Ethernet to
Wireless Blocking
Whether the wireless network can communicate
with the Ethernet network or not.
Wifi Multicast to
Unicast
Enable it to using unicast to transmit multicast
packet
Aggregation
It is applied when the destination end of all MPDU
are for one STA.
Short GI
It is not recommended to enable GI in obvious
environment of Multi-path effect.
Apply Changes
Click it to apply the settings temporarily. If you want
to save the settings of this page permanently, click
Save in the lower left corner.
WPS
Choose WLAN > WPS and the following page appears.
There are two ways for the wireless client to establish the connection with the modem through WPS. The modem generates
PIN, see the above figure. Click Regenerate PIN to generate a new PIN, and then click Start PBC , In the wireless client tool,
enter the PIN which is generated by the modem
，
start connection. The client will automatically establish the connection with
the modem through the encryption mode, and you need not to enter the key. The other way is the wireless client generates