Global411 MSW300Np4, Руководство пользователя

Страница: 51 / 52

50
The following table describes the parameters of this page:
Field Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Primary Server Set the primary NTP server manually.
Secondary Server Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from
the drop down list.
Diagnostic
In the navigation bar, click Diagnostic . The Diagnostic page that is displayed contains Ping , ATM Loopback , ADSL and
Diagnostic Test .
Ping
Choose Diagnostic > Ping . The page shown in the following figure appears.
The following table describes the parameter and button of this page:
Field Description
Host Enter the valid IP address or domain name.
Run Ping Click it to start to Ping.
ATM Loopback
Choose Diagnostic > ATM Loopback . The page shown in the following figure appears. In this page, you can use VCC
loopback function to check the connectivity of the VCC. The ATM loopback test is useful for troubleshooting problems with the
DSLAM and ATM network.
Click Run Loopback to start testing.