Global411 MSW300Np4, Руководство пользователя

Страница: 47 / 52

46
The following table describes the parameters of this page:
Field
Description
Enable SNMP
Select it to enable SNMP function. You need to
enable SNMP, and then you can configure the
parameters of this page.
Trap IP Address
Enter the trap IP address. The trap information is
sent to the corresponding host.
Community Name
(Read-only)
The network administrators must use this password
to read the information of this router.
Community Name
(Read-Write)
The network administrators must use this password
to configure the information of the router.
Others
Choose Advanced > Others , the page shown in the following figure appears.
Admin
In the navigation bar, click Admin . The Admin page that is displayed contains Commit/Reboot , Upgrade , System Log ,
Password and Time Zone.
Commit/Reboot
Choose Admin > Commit/Reboot , the page shown in the following figure appears. You can set the router reset to the default
settings or set the router to commit the current settings.