GILBARCO VEEDER-ROOT Encore 300 Series, Руководство по установке

Страница: 26 / 90

Installation
Page 22 MDE-3985L Encore® Installation Manual · May 2006
Pumps (MPD) Configurations
For pump blenders go to “Pump Blender Configurations” on page 26.
Figure 3-7: Encore Pump (MPD) Product Inlets and J-Box
Model #
Multi Product Pump
Model Description Encore
Inlets Product Inlets
(Typical)
NC0 1 Grade 2 Hose MPD Pump W W = Product 1
NC1 2 Grade 4 Hose MPD Pump W,X W = Product 1
X = Product 2
NG5 2 Grade Single Hose MPD Pump
NC2 3 Grade 6 Hose MPD Pump W,X,Y W = Product 1
X = Product 2
Y = Product 3
NG2 Single Hose MPD Pump 3 Grade 2 Hoses
NC3 MPD Pump 4 Grade 8 Hose W,X,Y,Z W = Product 1
X = Product 2
Y = Product 3
Z = Product 4
NG3 Single Hose +1 MPD Pump, 3+1 Grade, 4 Hoses W,X,Y,+Z W = Product 1
X = Product 2
Y = Product 3
+Z = Straight/
Unblended Product
Notes:
Table information assumes two-sided units.
1. Z is always a Straight/Unblended Product Inlet; +Z is always a Straight/Unb1
Product.
2. Product number does not signify grade on MPD units, for example; Product 1 is not
always Lo Grade, but is optionally Lo, Mid or Hi.
The FCC/Patent plate is on the inner sheathing to the right when facing side 1
Z
Y X
W
J-box
Main conduit
to electronics