GILBARCO VEEDER-ROOT Encore 300 Series, Руководство по установке

Страница: 19 / 90

MDE-3985L Encore® Installation Manual · May 2006 Page 15
Installation
Figure 3-1: Modified Encore Base for Rain Lip Clearance and Side Column Conduit
Entrance
• When adapting an Encore to an existing pit box or one that is not specifically designed for
the unit the rain lip may require modification or removal. If the rain lip is removed then
the entire base of the dispenser must be sealed to the island. Study the foundation layouts
and existing pit box to determine if modifications are required before mounting the unit on
the island. Refer to the following Warning for working in this area.
Lifting Encore Units
Before mounting the unit to the island, verify that pit box and unit base are compatible. Some
pit box plates have rain lips that require modification to Encore unit prior to placing unit on
plate. If the Encore unit will not fit properly onto pit box plate, unit will have to be lifted
according to instructions in this section and moved to a safe work area. Refer to
“Encore
Elevation Diagram (Encore 550 with SMART Meter)” on page 62 and “Encore Elevation
Diagram (Encore 500/ 500 S and 550 S with SMART Meter)” on page 63 . If this modification
is not required, do the following, and then proceed to section “Before Placing Unit on Fuel
Island” on page 14 .
Encore Series units have hoisting brackets mounted on top of upper housing.
Openings for optional conduit entry outside
the pit box through the column
WARNING
You are working in a potentiality hazardous environment where fuels and their vapors may be
present and could be ignited with sparks from grinding and cutting tools.
Always conduct work the required distance away a hazardous area and use the appropriate tools.
WARNING
Lifting heavy equipment can be hazardous.
Equipment could fall and cause severe injury or death.
Use lifting equipment of proper capacity and factor of safety when moving or positioning unit.
Stand clear from pump/dispenser when lifting and lowering.