GILBARCO VEEDER-ROOT Encore 300 Series, Руководство по установке

Страница: 21 / 90

MDE-3985L Encore® Installation Manual · May 2006 Page 17
Installation
Determine Unit Side and Type
Before lifting units onto island take note of the following:
• For units manufactured before January, 2003, model labels are located on Side 1.
For units manufactured after January, 2003, the FCC/Patent labels are located on the
inside sheathing on the right when facing side 1.
• To determine unit type refer to the unit model label to determine whether unit to be
installed is MPD (dispenser or pump) or Blender (dispenser or pump).
• Use the following table to locate the appropriate configuration for your unit.
Multi Product (MPD) Configurations
Dispenser (MPD) Configurations
For dispenser blenders go to “Dispenser Blender Configurations” on page 24. For additional
information, refer to M01432 Foundation Layout Encore.
Figure 3-3: Encore Dispenser MPD Product Inlets
For This Configuration Proceed To
Dispenser (MPD) “Dispenser (MPD) Configurations” on page 17
Pump (MPD) “Pumps (MPD) Configurations” on page 22
Dispenser Blender “Dispenser Blender Configurations” on page 24
Pump Blender “Pump Blender Configurations” on page 26
Pump STP “Wiring Dispenser (STP-Supplied Unit)” on page 33
Pump Self Contained “Wiring Pump (Self-Contained Unit)” on page 34
Ultra-Hi Dispenser “Ultra-Hi Configurations” on page 20
Encore Foundation 1 to 6 “Encore Foundation Diagrams: 1 of 6 (300/500
Dispensers)” on page 55
Encore Foundation (SMART Meter) 1 to 2 “Encore Elevation Diagram (Encore 550 with SMART
Meter)” on page 62
Model #
Multi Product Dispenser
Model Description Encore
Inlets Product Inlets
(Typical)
NA0 1 Grade 2 Hose MPD Dispenser W W = Product 1
NA1 2 Grade 4 Hose MPD Dispenser W,X W = Product 1
X = Product 2
NG4 2 Grade Single Hose MPD Dispenser
NA2 3 Grade 6 Hose MPD Dispenser W,X,Y W = Product 1
X = Product 2
Y = Product 3
NG0 Single Hose MPD Dispenser 3 Grade 2 Hoses
W
X
Y
Z
Dispenser inlet
pipe rail
Model plate on Side 1 bottom rail
(on models mfg. before Jan.
2003) Later models, plate is
located on inside of bottom frame.
Encore Dispenser (MPD - Side 1)