Getinge Castle MTP 1800 Series, Руководство по эксплуатации

Страница: 94 / 98

A–2
CYCLE ACCESS SCREEN
PROCESS SCREEN
CYCLE ACCESS SCREEN
Programmer should-
➢
Press ENTER PASSWORD
➢
Type in correct password “12345”, press
ENTER, then press DONE. This will unlock
the system.
➢
Select PROGRAM CYCLE
SERVICE PASSWORD CYCLE PASSWORD
Enter
Password
Change
Password
Unlocked
Press to
change
P/W
LOCKED
Service
Password
Program
Cycle
MAIN
MENU
Adjust
Calendar
Clock
Service
Menu
CYCLE 1
PREWASH
REMAIN TIME
No Active Alarms Exist
Temp.
Guarantee
120
Sump
Fill
Cycle
Hold
Answer
Alarm
CYCLE ABORT
120
Temp Set
130
Sump Temp
190
Fill Temp
CYCLE 1
PREWASH
NO ACTIVE ALARMS EXIST
REMAIN TIME
CYCLE ABORT
ANSWER
ALARM
CYCLE
HOLD
TEMP
GUAR'T
BOTTLE
WASHING
ON
SUMP
FILL
TEMP SET
SUMP TEMP
FILL TEMP
130
120
190
120
This prompt displays when the Bottle Washing option is activated.
Displays the current cycle.
Displays the current phase of the cycle.
Displays the current alarm status.
Displays the programmed sump temperature parameter.
Displays the current remaining time in phase.
Displays the actual sump temperature.
Displays the house water fill temperature.
Press this prompt to clear any timed alarm.
Press this prompt to stop all functions of the washer and set the alarm.
Press this prompt to stop the phase timer. Press the prompt again and
the phase timer will resume. (Timer will resume after five (5) minutes
if the prompt is not pressed again to release the timer.)
This prompt displays during the sump filling process.
This prompt displays if the program has a "TEMP. GUARANTEE"
on the temperature of the sump.