Getinge Castle MTP 1800 Series, Руководство по эксплуатации

Страница: 56 / 98

Operating Instructions
3–4
EMERGENCY STOP
BURN HAZARD: Do not open a Washer door during a cycle.
This could release hot water through the door opening,
resulting in burns to personnel.
Using the EMERGENCY
STOP Switch
An EMERGENCY STOP switch is provided at the Load Door and Unload
Door to immediately terminate all processing functions and activate all
visual and audible alarms. The EMERGENCY STOP Switch is a push/pull
type of switch.
Pressing ABORT
LED Control Panels – press the “ABORT” function key loacted in the left
column of function keys
Touch Control Panels (TCP) – press the “ABORT” prompt in the lower right
corner of the PROCESSING CYCLE SCREEN.
• The washer ceases operation.
• The initial Control Screen is displayed.
If desired, pressing START begins a new wash cycle.
Shutting Down the Washer
In an emergency, it may be necessary to remove electrical power supplied
to the washer or to turn off the steam and water supplies. All users should
know the location of the main circuit breaker to disconnect the main
electrical power and the steam and water supply shutoff valves at the
washer site.
The Electrical Disconnect Switch de-energizes the controls
only; it does not remove all power from the washer.
HS
WARNING
WARNING