Getinge Castle MTP 1800 Series, Руководство по эксплуатации

Страница: 69 / 98

61301604086 6–1
Section 6 Installation Instructions
INTRODUCTION
This section is for convenient customer reference. It summarizes information
used for installing the bedding dispenser.
Official agreements, pertinent drawings, and related documents are
provided separately to the customer by authorized personnel.
UNCRATING & EQUIPMENT INSPECTION
Before signing the Bill of Lading and accepting the equipment, inspect the
outside of the crates for any visible damage. If any damage has occurred,
note it on the Bill of Lading.
After accepting the equipment, if any visible damage is apparent notify the
carrier's insurance and process a claim. At this point it is good practice to
take pictures of the crate to back up the claim if internal damage has
occurred.
Move the crate(s) to the general area where the machine will be set in place.
Uncrate the outside of the machine and inspect the contents of the
equipment. If damage is apparent, take pictures of the areas.
Upon completion of the inspection process, place the machine in the spot
where the equipment will be connected to the facility's services. Make sure
that the location of the equipment has at least a 30" clearance around the
machine control panel for general maintenance.
Installation should be performed by Authorized Service Technicians
only.