Gestetner A294, Руководство по обслуживанию

Страница: 287 / 600

SERVICE PROGRAM MODE
SM 4-59 A294/A295
Serv
ice
Ta
b
le
s
4.2.3 TEST PATTERN PRINTING (SP2-902)
NOTE: Do not operate the machine until the test pattern is printed out completely.
Otherwise, an SC may occur.
1. Access the SP mode which contains the test pattern you need.
2. Touch the “Copy Mode” key on the operation panel to access the copy mode
display.
3. Select the paper size.
4. Press the “Start” key to print the test pattern.
5. After checking the test pattern, exit copy mode by touching the “SP Mode” key.
6. Exit the SP mode.
NOTE: Test patterns are printed out until the main switch is turned off and on. Use
this test pattern to test the printer controller.
Test Pattern Table (SP2-902-2: Test Pattern Printing – IPU)
No. Test Pattern No. Test Pattern
0 None 7 Vertical Strips
1 Vertical Line (1-dot) 8 Grayscale (Vertical)
2 Vertical Line (2-dot) 9 Grayscale (Horizontal)
3 Horizontal Line (1-dot) 10 Cross Pattern
4 Horizontal Line (2-dot) 11 Argyle Pattern
5 Alternating Dot Pattern 12 Frequency (Horizontal)
6 Grid Pattern (1-dot) 13 Frequency (Vertical)
Test Pattern Table (SP2-902-3: Test Pattern Printing – Printing)
No. Test Pattern No. Teat Pattern
1 Alternating Dot Pattern (1,024-dot) 15 16 Trimming Area
2 Alternating Dot Pattern (4-dot) 16 Argyle Pattern
3 Alternating Dot Pattern (2-dot) 17 Line Cross Stitch
4 Alternating Dot Pattern (1-dot) 18 Black Band (Vertical)
5 Grid Pattern (1-dot 0 ch) 19 Black Band (Horizontal)
6 Grid Pattern (1-dot 1 ch) 20 Gray Trim
7 Grid Pattern (1-dot 2 ch) 21 Stair Pattern
8 Grid Pattern (1-dot 3 ch) 22 Grayscale Vertical 20 mm
9 Vertical Line (1-dot) 23 Grayscale Vertical 40 mm
10 Horizontal Line (1-dot) 24 Grayscale Vertical 20 mm
11 Vertical Line (2-dot) 25 Grayscale Horizontal 40 mm
12 Horizontal Line (2-dot) 26 Grayscale Horizontal 20 mm
13 Grid Pattern (1-dot) 27 White (Out data mask)
14
Full Dot Pattern
28
Grid Pattern (1-dot) (0 ch mode)
(Out data overlay)
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA